Table of Contents
Advertisement
A
–
indicates that it is currently on.
DISPLAYLINK+
then
5. Stop clicking
would like to change.
5. To turn the link on, press the
off, press the
6. Repeat steps 4 and 5 for each link setting you want to change.
When you've finished, wait several seconds for the display to return to its stan-
dard mode.
Y our link settings remain in memory when you place the Nº31.5 into
when you turn off the
The Nº31.5 also may be set to automatically enter standby when left in stop for a
Auto-Standby
user-selectable period of time. As shipped from the factory, its standby function is
manual (that is, it only enters or leaves standby when told to do so by the user).
To change between manual and timed/automatic standby:
1. Press and hold the
2. Release the
vance the timer. Single clicks will advance it by one minute. Press-
ing and holding the button will stream the numbers by to a maxi-
mum of 120 minutes.
MANUAL
3. When you have selected the delay you desire, simply allow the
Nº31.5 to "time-out" and revert to a normal display .
The Nº31.5 will display
ing into standby as a result of the auto standby setting you have chosen.
sign beside an option indicates that it is currently off; a
If you continue clicking
display mode
, the links are shown again beginning with
, then
RECORD LINK
MUTE LINK,
display mode
button.
program –
main power
standby
button and then "click"
standby
Search reverse
coming below the 1 minute mark.
AUTO STANDBY
after the display shows
and so on.
when the display shows a link you
button; to turn the link
program +
switch — even if AC power is interrupted.
button until the display reads
search forward
reduces the timer delay, with
for about one second prior to actually go-
sign
+
,
INDEX 0
,
standby
.
MANUAL
to ad-
47
Advertisement
Table of Contents
