Table of Contents
Advertisement
Using indices
Beginning play at a
specific location in a track
The pause function
Repeating an entire CD
Repeating a track
If a CD has indices, you may use them to begin play in the middle of a track.
1. Press
index mode
. (If there was no CD in play , the display will
show
INDEX SEARCH
searches the disc, the LED above the button will flash to indicate
index mode
.
2. Using
next
and
previous
Control), select an index.
3. Press
to begin play at the index you selected.
play
Y ou may use
on the Remote Control to begin play at a specific time—
prg/time
whether or not it corresponds to an index.
1. Using
track +
or
track –
control), select a track.
2. Press
, then press the numbered buttons corresponding to
prg/time
when you' d like play to begin. (The numbers you select will ap-
pear in the
time
part of the display .)
3. To begin play at that point, press
Note: The time you select depends on the selection you've made
with the
display mode
For example, if you want to begin play one minute and thirty seconds into track
2, first press
display mode
select track 2 by pressing
enter
, then press
.
130
play
To suspend play while a CD is playing, press
point, press
again.
pause
If left in
for several minutes, the transport will stop spinning and the laser
pause
will turn off (thereby enhancing the longevity of both). This will be indicated by
the
indicator in the display ("
pause
feature may be engaged by pressing and holding the
extended pause
button until the indicator begins to flash in the display . Pressing
resume play at the point where
allow the disc to get up to speed).
To "cue up" the beginning of a CD or track, press
To begin play, press
pause
while play is suspended.)
To repeat (continuously) all tracks on a CD, press
function is active, the LED above the button is lit. To return to normal play,
disc
press
again.
repeat disc
To repeat (continuously) the track in play, press
track function is active, the LED above the button is lit. To return to normal play ,
press
again.
repeat track
.) After a brief delay while the transport
(or the numbered buttons on the Remote
, or the numbered buttons on the remote
.
play
button: elapsed or remaining, CD or track.
until the
and
elapsed time
track +
or
track –
(or by entering
pause
") flashing on and off. Alternatively , this
||
pause
was first pressed, (after a short delay to
pause
again. (You may also select another track or index
repeat disc
repeat track
LEDs light. Then
on track
02
). Press
prg/time
. To resume play at the same
pause
again will
pause
before pressing
play
. While the
repeat
. While the repeat
,
(5).
39
Advertisement
Table of Contents
