16
Levelling
screws
When level, place the disc damper on the spindle, then press Lid Open/
Close again to close the Lid.
8
INSERT BATTERIES IN THE REMOTE CONTROL
Using the supplied
5
of the Remote Control's battery compartment (the end opposite the projec-
tion lens).
Insert two AA batteries according to the symbols on the inside of the bat-
tery compartment cover. Replace the battery compartment cover and
screws.
9
TURN EVERYTHING ON, AND ENJOY!
After all connections have been made in the system, turn on the various
components, leaving the power amplifier(s) for last.
Bubble level
⁄
" hex key , remove the two screws securing the cover
64
Projection
lens
–
+
+
–
Levelling
screws