Table of Contents
Advertisement
46
place only the Nº31.5 into standby mode (since you may wish to
listen to another input on your processor).
When the Nº31.5 is first turned on, the standby link setting is
on.
Mark Levinson digital processors allow you to set an "in-
Alias link:
put alias" for each of their sources; this alternative name appears
on their display . The Nº31.5's alias link automatically overrides the
alias setting for its input. When you select the Nº31.5's input, the
processor will show
When the Nº31.5 is first turned on, the alias link setting is on.
Play link:
When you press the Nº31.5's
matically selects the Nº31.5's input on the digital processor.
Note: If you've connected the Nº31.5 to two or more of the
digital processor's inputs, the play link will look first for AES/EBU
interconnection, then S/PDIF , then ST, and finally EIAJ.
When the Nº31.5 is first turned on, the play link setting is on.
This links the
Display link:
and the digital processor. When the components are linked, both
displays will be set to the same brightness. Pressing
on either component will affect both displays.
sity
When the Nº31.5 is first turned on, the display link setting is on.
This links the
Polarity link:
mote Control to the
The polarity link also allows inverted polarity to be saved with
a program. When inverted polarity is part of a saved program, this
link turns on the digital processor's
Programming.)
The polarity link setting is always on, and can't be changed.
In addition to the Setting Options, the Nº31.5 has the ability to play
"Index 0," the CD equivalent of the "lead-in grooves" on an LP .
The Nº31.5 allows you to change the Index 0 option and its six Link options to
suit your own preferences. [Note: The polarity link setting is always on, and can't
be changed.]
1. Make sure that the
main power
tion.
2. Enable the Nº31.5's controls by pressing
Note: To change your Nº31.5's link settings, your Mark Levinson
digital processor also must be connected (linked) and turned on.
3. Press and hold the front-panel
until
appears on the display . [Note: In several seconds,
SET OPTIONS
if you make no changes to the link settings, the display will go back
into its standard mode. To return to
again.]
display mode
4. Click the
display mode
each of your Nº31.5's options, in this order:
INDEX 0 –
RECORD LINK –
MUTE LINK –
STANDBYLINK + (seen only when Linked)
ALIAS LINK +
PLAY LINK +
DISPLAYLINK +
on its display .
No31
play
button, this link auto-
functions of the Nº31.5
display intensity
button on the Nº31.5's Re-
d/a polarity
polarity invert
function of the digital processor.
polarity invert
switch is set to the "on" ("|") posi-
standby
button and hold it
display mode
SET OPTIONS
button a few times. The display will show
(available even without Linking)
(seen only when Linked)
(seen only when Linked)
(seen only when Linked)
(seen only when Linked)
(seen only when Linked)
display inten-
function. (See
.
, press and hold
Advertisement
Table of Contents
