Techshell VXH-4 User Manual page 62

TECHSHELL Digital Video Recorder User Manual
Step 2: Enter into Network interface and then click "Ethernet Connected" to check the internet connection of Apple PC.
Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR's Main Menu Setup Network interface
to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the
same as the PC. If using DHCP, please enable DHCP in the DVR and router.
Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input
http://192.168.1.100:81(here 192.168.1.100 is LAN IP of DVR, 81 is the http port of DVR). Click " "button, the browser will
download Active X control as shown below:
56