Table of Contents
Advertisement
Step5: click "default" button to resort default setting;
click "apply" button to save the setting; click "exit"
button to exit current interface.
4.2.3 Spot
Step1: enter into system configuration live configuration Spot; refer to Fig 4-9:
Step2: select split mode: 1×1and channel
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picture display
Step4: selected the split mode, then setup current
picture group. Click
channel groups of dwell picture; click
set the latter channel groups of dwell picture.
Step5: click "default" button to resort default setting;
click "apply" button to save the setting; click "exit"
button to exit current interface
4.2.4 Mask
User can setup private mask area on the live image picture, max threes areas.
Digital Video Recorder User Manual
button to setup the previous
button to
Fig 4-8 live configuration-host monitor
Fig 4-9 live configuration-Spot
20
Hide quick links:
Advertisement
Table of Contents
