Step2: the setup steps of Buzzer, Email, To Alarm Out
are familiar with alarm handling. User can refer to
Chapter 4.5.1 Sensor
Step 3: select a hard disk in the pull down list box. When
the disk capacity is lower than that value, there will
appear some text information on the lower right of the live
image.
Step 4: click "default" button to resort default setting; click
"apply" button to save the setting; click "exit" button to exit
current interface.
4.5.5 Alarm out
Alarm out includes three sub menus: alarm out, schedule and buzzer
Alarm out
Step1: enter into system configuration alarm out; refer to Fig 4-28:
Step2: in this interface, set relay alarm out name, select hold time which means the interval time between the two adjacent
alarms.
Step3: user can setup all channels with same parameters. Tick off "all" to do relevant setup.
Step4: click "apply" button to save the setting; click "exit" button to exit current interface.
Schedule
Step1: enter into system configuration schedule;
Step2: the setup steps of alarm out schedule are familiar
with schedule; user can refer to 4.4.1 Schedule for
details.
Note: the default schedule of motion detection is
full-selected, that is, the color of schedule setting
interface is blue.
Digital Video Recorder User Manual
alarm handling for more details.
Fig4-27 other alarm
Fig 4-28 system configuration-alarm out
33