Record Stream - Techshell VXH-4 User Manual

Fig 4-11 record configuration-enable
Step2: tick off record, audio and record time
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current
interface.

4.3.2 Record stream

Step1: enter into system configuration record configuration record bit rate; refer to Fig 4-12:
Step2: setup rate, resolution, quality, encode and max bit stream
Step3: user can setup all channels with same parameters, tick off "All", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current
interface.
Note: if the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.
TECHSHELL Digital Video Recorder User Manual
Parameter Meaning
Record Record switch
channels
Audio Enable live record audio
of every
22