Techshell VXH-4 User Manual page 37

Step4: click Area button to pop-up a window as Fig 4-24:
Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value
is the higher sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its value
according to the practical conditions; click
will be cleared; click
following picture）; Click
Note: when user drag mouse to set motion detection area, they have to click
firstly, and then make the operation.
Step6: user can also setup all channels with same parameters.
Step7: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current
interface.
Schedule
Step1: enter into system configuration alarm configuration schedule; refer to Fig 4-25:
Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
TECHSHELL Digital Video Recorder User Manual
Fig 4-24 motion-area
icon, set the whole area as detection area; click
icon, user can test whether the sensitivity value and motion area are suitable accordingly（refer to
icon, to save the setting; click icon, exit current interface.
icon to clear all set detection area
icon, the set detection area
31