Techshell VXH-4 User Manual page 49

② Advance
Step1: enter into system configuration
Step2: in the Advance interface, after clicking preset "Setting" button, a dialog box will pop-up as Fig 4-38:
Fig 4-37 P.T.Z configuration-advance
a. in the preset set interface, click Setting button to see a window as Fig 3-39:
b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate
speed and the value of zoom, focus and iris of the dome;
c. select the serial number of the preset point. Click
light.
Note: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two buttons
are just available when selecting PELCOP or PELCOD.
TECHSHELL Digital Video Recorder User Manual
P.T.Z configuration advance; refer to Fig 4-37:
Fig 4-39 preset set-setting
button to enable the PTZ wiper and click
Fig 4-38 advance-preset setting
button to enable the PTZ
43