1. Manuals
  2. Brands
  3. Techshell Manuals
  4. DVR
  5. VXH-4
  6. User manual

Techshell VXH-4 User Manual

Vxh-4 & vxs-8 digital video recorders
Hide thumbs Also See for VXH-4:
Table of Contents

Advertisement

Quick Links

DVR User Manual
For VXH-4 & VXS-8 digital video recorders
All rights reserved
techshell.info

Advertisement

Table of Contents
loading

Related Manuals for Techshell VXH-4

Summary of Contents for Techshell VXH-4

  • Page 1 DVR User Manual For VXH-4 & VXS-8 digital video recorders All rights reserved techshell.info...
  • Page 2 TECHSHELL Digital Video Recorder User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label.

  • Page 3: Table Of Contents

    TECHSHELL Digital Video Recorder User Manual Table of Contents Introduction..................................1 1.1 DVR Introduction ....................................... 1 1.2 Main Features........................................1 Hardware Installation .................................4 2.1 Install Hard Drive ....................................... 4 2.1.1 Install Hard Drive ..................................... 4 2.2 Front Panel Instructions ..................................... 5 2.3 Rear Panel Instructions......................................
  • Page 4 TECHSHELL Digital Video Recorder User Manual 4.1.2 Time & date ......................................17 4.1.3 DST ........................................18 4.2 Live configuration......................................18 4.2.1 Live........................................18 4.2.2 Main monitor......................................19 4.2.3 Spot ........................................20 4.2.4 Mask........................................20 4.3 Record configuration......................................21 4.3.1 Enable ........................................21 4.3.2 Record stream .......................................
  • Page 5 TECHSHELL Digital Video Recorder User Manual 4.6.2 Sub stream ......................................34 4.6.3 Email ........................................35 4.6.4 Other settings ......................................36 4.7 User management configuration ..................................40 4.8 P.T.Z configuration ......................................41 4.9 Reset..........................................45 Record search & playback and backup..........................46 5.1 Time search........................................
  • Page 6 TECHSHELL Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC................................54 7.2.1 On LAN........................................55 7.2.2 On WAN ........................................ 57 7.3 The remote live preview interface..................................58 7.4 Remote playback & backup....................................62 7.4.1 Remote playback ....................................62 7.4.2 Remote backup......................................

  • Page 7: Introduction

    TECHSHELL Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote...
  • Page 8 TECHSHELL Digital Video Recorder User Manual Support saving recorded files with AVI standard format to a remote computer through internet • RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording • Support recycle after HDD full •...
  • Page 9 TECHSHELL Digital Video Recorder User Manual live view, manual record, playback, PTZ control and remote live view Support 1 administrator and 63 users. • Support event log recording and checking, events unlimited • NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol •...

  • Page 10: Hardware Installation

    TECHSHELL Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive 2.1.1 Install Hard Drive Notice: 1.This series support one SATA hard drive.

  • Page 11: Front Panel Instructions

    TECHSHELL Digital Video Recorder User Manual 2.2 Front Panel Instructions Notice: The front panel descriptions are only for reference; please make the object as the standard. Type Item Name Description Power Power indicator, when connection , the light is blue...

  • Page 12: Rear Panel Instructions

    TECHSHELL Digital Video Recorder User Manual Type Item Name Description Direction button Change direction to select items Input button Multi-screen Change screen display mode like1/4/9 channel Enter button Confirm selection IR receiver For remote controller To connect external USB devices like USB flash, USB port USB HDD for backup or update firmware;...
  • Page 13 TECHSHELL Digital Video Recorder User Manual Item Name Description Video out Connect to monitor Connect to monitor as an AUX output channel by channel. Only Spot out video display, no menu show Audio out Audio output, connect to the sound box...

  • Page 14: Remote Controller

    TECHSHELL Digital Video Recorder User Manual Item Name Description Video out Connect to monitor Connect to monitor as an AUX output channel by channel. Only Spot out video display, no menu show Audio out Audio output, connect to the sound box...
  • Page 15 TECHSHELL Digital Video Recorder User Manual Fig 2.6 Remote Controller Item Name Function Power Button Soft switch off to stop firmware running. Do it before power off. INFOR Button Get information about the DVR like firmware version, HDD information REC Button...

  • Page 16: Control With Mouse

    TECHSHELL Digital Video Recorder User Manual Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0. When use of remote controller to control single DVR, it’s not necessarily to reset the device ID, user can do operation directly; when control multiple DVR with remote controller, please refer to below steps: Step1: Activate remote controller to control DVR: enable DVR: turn the IR sensor of the remote controller to the IR receiver that on the front panel, press the number key 8 twice, then input device ID (Range from: 0-65535;...
  • Page 17 TECHSHELL Digital Video Recorder User Manual Click left button to enter. Click right button to cancel setup, or return to the previous. If want to input the value, move cursor to the blank and click. An input window will appear as Fig2.7. It supports digitals, letters and symbols input.

  • Page 18: Basic Function Instruction

    TECHSHELL Digital Video Recorder User Manual Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power on Step1: connect with the source power; switch on the power button near the power port in the rear panel Step2: the device will be loaded, and the power indicator will display blue Step3: before start, a WIZZARD window will be pop-up and show some information about time zone，time setup，network...

  • Page 19: Login

    TECHSHELL Digital Video Recorder User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456”...

  • Page 20: Live Playback

    TECHSHELL Digital Video Recorder User Manual 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. User can do concrete operation by click the buttons on screen. Fig 3-3 live playback...

  • Page 21: Main Menu Setup Guide

    TECHSHELL Digital Video Recorder User Manual Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Fig 4-1 menu toolbar Click the icon beside the screen display mode to display a channel select dialog.

  • Page 22: Basic Configuration

    TECHSHELL Digital Video Recorder User Manual Fig 4-2; press MENU button on the front panel or operate with remote controller also can display the main menu. Click Setup icon will pop-up the configuration menu: Fig 4-2 main menu configuration menu 4.1 Basic configuration...

  • Page 23: Time & Date

    Digital Video Recorder User Manual Max online uses: set the max user amount of network connection Video output: the resolution of live display interface, range from: VGA800*600, VGA1024*768, VGA1280*1024 and CVBS. Note： ： ： ： When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor.

  • Page 24: Dst

    Digital Video Recorder User Manual 4.1.3 DST Step1: enter into system configuration basic configuration DST; refer to Fig 4-5: Fig 4-5 basic configuration-DST Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

  • Page 25: Main Monitor

    TECHSHELL Digital Video Recorder User Manual Note: Click Camera Name to see a soft keyboard. User can self-define the camera name. Click Shift button to input Capital letters; click Shift button again to input Chinese characters. Step2: tick off camera name and click “setting” button to display a window as Fig 4-7:...

  • Page 26: Spot

    Digital Video Recorder User Manual Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Fig 4-8 live configuration-host monitor 4.2.3 Spot Step1: enter into system configuration live configuration Spot; refer to Fig 4-9: Step2: select split mode: 1×1and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display...

  • Page 27: Record Configuration

    Digital Video Recorder User Manual Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask area, refer to below picture. Click Apply button to save the setting. Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to save the setting.

  • Page 28: Record Stream

    TECHSHELL Digital Video Recorder User Manual Parameter Meaning Record Record switch every channels Audio Enable live record audio Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.

  • Page 29: Time

    TECHSHELL Digital Video Recorder User Manual Parameter Meaning Resolution Support CIF Range from 1-30（NTSC）1-25(PAL) Quality The higher the value is, the clearer the Recorded image is. Six options: lowest, lower, low, medium, higher and highest. Fig 4-12 record configuration-record bit rate 4.3.3 Time...

  • Page 30: Stamp

    TECHSHELL Digital Video Recorder User Manual Fig 4-13 record configuration-time 4.3.4 Stamp Stamp： ： ： ： User can overlap the channel name and time stamp on video. Step1: enter into system configuration record configuration stamp; refer to Fig 4-14: Fig 4-14 record configuration-stamp...

  • Page 31: Recycle Record

    TECHSHELL Digital Video Recorder User Manual Step2: tick off camera name, time stamp; click Setting button, and then user can use cursor to drag the camera name and time stamp in random positions. Please refer to below Figures: Before drag after drag Step3: user can also setup all channels with same parameters.

  • Page 32: Schedule

    TECHSHELL Digital Video Recorder User Manual 4.4.1 Schedule The volume means the seven days of a week from Monday to Sunday; the row means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area, gray means unchecked area.

  • Page 33: Motion

    TECHSHELL Digital Video Recorder User Manual 4.4.2 Motion Step1: enter into system configuration schedule configuration motion; refer to Fig 4-17: Step2: the setup steps of motion are familiar with schedule; user can refer to 4.4.1 Schedule for details. Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue.

  • Page 34: Alarm Configuration

    TECHSHELL Digital Video Recorder User Manual Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5 Alarm configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.
  • Page 35 TECHSHELL Digital Video Recorder User Manual Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger Step3: After selecting Buzzer, there will be triggered buzzer alarm out; Full screen alarm: when triggered alarm, there will pop up full screen alarm; Email: tick of this function. When an alarm trigged, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc.

  • Page 36: Motion

    TECHSHELL Digital Video Recorder User Manual Fig 4-22 sensor-schedule Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue.
  • Page 37 TECHSHELL Digital Video Recorder User Manual Step4: click Area button to pop-up a window as Fig 4-24: Fig 4-24 motion-area Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value is the higher sensitivity you get.

  • Page 38: Video Loss

    TECHSHELL Digital Video Recorder User Manual 4.5.3 Video loss Step1: enter into system configuration alarm configuration video loss; refer to Fig 4-26: Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details.

  • Page 39: Alarm Out

    Digital Video Recorder User Manual Step2: the setup steps of Buzzer, Email, To Alarm Out are familiar with alarm handling. User can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step 3: select a hard disk in the pull down list box. When the disk capacity is lower than that value, there will appear some text information on the lower right of the live image.

  • Page 40: Network Configuration

    TECHSHELL Digital Video Recorder User Manual Buzzer Step1: enter into system configuration buzzer; Step2: tick off Buzzer, set buzzer alarm hold time 4.6 Network configuration Network configuration includes four submenus: network, sub stream, Email and other settings. 4.6.1 Network Step1: enter into system configuration network configuration network;...

  • Page 41: Email

    Digital Video Recorder User Manual Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface. Parameter Meaning Range from: 1-25 Resolution Support CIF Quality The higher the value is, the clearer the record image.

  • Page 42: Other Settings

    TECHSHELL Digital Video Recorder User Manual Send address/password: sender’s email address/password Receive address: receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: Tick off this item. The system will attach images when sending the emails.
  • Page 43 TECHSHELL Digital Video Recorder User Manual Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server.
  • Page 44 TECHSHELL Digital Video Recorder User Manual operation: Click “Tools”-- “Folder options” Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1． ． ． ． Domain name Registration （ （ （ （ Take www.dyndns.com for example） ） ） ）...
  • Page 45 TECHSHELL Digital Video Recorder User Manual Click” Create Account” button to create user account. 2． ． ． ． DVR Setting （1） Domain name According to the domain name registration of “DDNS”， the domain name for DVR is “www. abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”.

  • Page 46: User Management Configuration

    TECHSHELL Digital Video Recorder User Manual DDNS server Website provided by dynamic domain name supplier. The ， ， optional: www.dns2p.net www.meibu.com www.dyndns.comandwww.no-ip.com User name User name for log in the website of domain name supplier Password Password for log in the website of domain name supplier Host domain The domain name user registered at the supplier’s website.

  • Page 47: Configuration

    TECHSHELL Digital Video Recorder User Manual Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box and then click Delete button to delete this user.
  • Page 48 TECHSHELL Digital Video Recorder User Manual Fig 4-36 P.T.Z configuration-serial port Definitions and descriptions of serial port: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.
  • Page 49 TECHSHELL Digital Video Recorder User Manual ② Advance Step1: enter into system configuration P.T.Z configuration advance; refer to Fig 4-37: Step2: in the Advance interface, after clicking preset “Setting” button, a dialog box will pop-up as Fig 4-38: Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting a.
  • Page 50 TECHSHELL Digital Video Recorder User Manual Click Save button to save the settings; click icon to hide the tool bar, right-key can remerge it; click icon to exit the current interface. d. in the preset interface, click OK button to save the setting; click Exit button to exit current interface.

  • Page 51: Reset

    TECHSHELL Digital Video Recorder User Manual position of preset point. Click Preview button to preview the cruise line and then click OK button to save the setting. Next, click Exit button to exit current interface. c. select a preset point in the cruise line list box and click Delete button to delete that cruise line; click Clear all button to clear all cruise line from the list box;...

  • Page 52: Record Search & Playback And Backup

    TECHSHELL Digital Video Recorder User Manual Record search & playback and backup Search configuration includes four submenus: Time Search, Event Search, File Management and Snap. 5.1 Time search Step1: enter into Search configuration Time Search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: select channel, screen display mode, the highlight date in the calendar means have record data Step3: select a date and press Search button.

  • Page 53: Event Search

    TECHSHELL Digital Video Recorder User Manual Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button. Click this button to expand the whole interface. 5.2 Event search Step1: enter into Search configuration event search; refer to Fig 5-2:...

  • Page 54: File Management

    TECHSHELL Digital Video Recorder User Manual Step2: After clicking Search button, the searched event information will displayed in the event list box. User can select date, channel. Tick off Motion, Sensor or All accordingly. Step3: double check a certain record file to playback.

  • Page 55: Image

    TECHSHELL Digital Video Recorder User Manual 5.4 Image In this interface, user can set start, end time and channels to search the captured images and save, lock or delete these images. There are at most 2000 images which can be saved in the SATA disk. If there are more images saved in the SATA disks than 2000 images, those additional images will supersede prior images.

  • Page 56: Manage Dvr

    TECHSHELL Digital Video Recorder User Manual Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc.

  • Page 57: Upgrade

    TECHSHELL Digital Video Recorder User Manual total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting Step3: select a hard disk and click Format button to star format.

  • Page 58: Remote Surveillance

    TECHSHELL Digital Video Recorder User Manual Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform.
  • Page 59 TECHSHELL Digital Video Recorder User Manual Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8.

  • Page 60: Remote Surveillance Through Apple Pc

    TECHSHELL Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped.

  • Page 61: On Lan

    TECHSHELL Digital Video Recorder User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click icon. The following window will pop up. Please select “System Preferences” ”Internet &Wireless” click “Network”...
  • Page 62 TECHSHELL Digital Video Recorder User Manual Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main Menu Setup Network interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC.

  • Page 63: On Wan

    TECHSHELL Digital Video Recorder User Manual Step 5: Click icon and then select the Active X control, the welcome interface will be shown. Click “Continue” ”Install” button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control.

  • Page 64: The Remote Live Preview Interface

    TECHSHELL Digital Video Recorder User Manual 7.3 The remote live preview interface Fig 7-2 Remote live preview interface Symbol and function Definitions: ① Channel indicator Screen display mode Volume ④ Snapping picture Start manual record Start IE record ⑦ Bidirectional talk...
  • Page 65 TECHSHELL Digital Video Recorder User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below:...
  • Page 66 TECHSHELL Digital Video Recorder User Manual Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down.
  • Page 67 TECHSHELL Digital Video Recorder User Manual Click the right mouse on the live interface, a pull-down menu will appear as below Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FPS （NTSC）...

  • Page 68: Remote Playback & Backup

    TECHSHELL Digital Video Recorder User Manual 7.4 Remote playback & backup 7.4.1 Remote playback Click button to enter into record playback interface, refer to Fig 7-5: Select the record date and channels; double-click the file name in the record file list box, user can play that file and preview the picture.
  • Page 69 TECHSHELL Digital Video Recorder User Manual Step1: Enter into Search time search; refer to Fig 7-6: Fig 7-6 time search interface Step2: click “Search” button. The record data will be displayed in the data information list box; the highlight date in the area means have record data, click those data;...
  • Page 70 TECHSHELL Digital Video Recorder User Manual Fig 7-7 Time search playback By Event Search: Step1: Enter into Search event search; refer to Fig 7-8:...
  • Page 71 TECHSHELL Digital Video Recorder User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box. Double-click certain item to playback...
  • Page 72 TECHSHELL Digital Video Recorder User Manual Step1: Enter into Search file management; refer to Fig 7-9: Fig 7-9 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock”...

  • Page 73: Remote Backup

    TECHSHELL Digital Video Recorder User Manual 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time and then click “search’ button to display the file information in the file list box.

  • Page 74: Remote System Configuration

    TECHSHELL Digital Video Recorder User Manual 7.5 Remote System Configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters.

  • Page 75: Mobile Surveillance

    TECHSHELL Digital Video Recorder User Manual Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR.
  • Page 76 TECHSHELL Digital Video Recorder User Manual Step4： ： ： ： PCam will be opened automatically after installed Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully.

  • Page 77: By Phones With Symbian

    TECHSHELL Digital Video Recorder User Manual 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit. Symbian S40 support Symbian UIQ support Symbian S80 support Symbian S60 support Symbian S60 3 Edition-Symbian OS v9.1...
  • Page 78 TECHSHELL Digital Video Recorder User Manual Step5：A Scam shortcut icon appears on the system menu after finished. Step6：Run Scam program. It will enter a function interface. Live view: to do mobile live view Image view: to check the pictures snapped in live view System setting: Login setting and Alarm setting.

  • Page 79: The Operation Method For Iphone Mobile Clients

    TECHSHELL Digital Video Recorder User Manual 8.3 The operation method for iPhone mobile clients 1. Install through iphone. Step 1. Open App Store function of iphone Step 2. Enable “search” function to search “SuperCam”...
  • Page 80 TECHSHELL Digital Video Recorder User Manual Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to...
  • Page 81 TECHSHELL Digital Video Recorder User Manual 2. Install through PC Step 1: Install iTunes store in PC and then login Step 2: Connect iPhone and PC Step 3: Enable “search” function to search “SuperCam” Step 4: Click “free application” button...
  • Page 82 TECHSHELL Digital Video Recorder User Manual Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button Operation Instruction for iphone Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server”...

  • Page 83: Main Interface

    TECHSHELL Digital Video Recorder User Manual Main Interface 【 【 【 【 Playback】 】 】 】 playback record file 【 【 【 【 Image】 】 】 】 image view 【 【 【 【 Log】 】 】 】 【 【 【 【 Server List】 】 】 】...
  • Page 84 TECHSHELL Digital Video Recorder User Manual Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image...
  • Page 85 TECHSHELL Digital Video Recorder User Manual Image view interface Record Playback interface Click the record file to playback.
  • Page 86 TECHSHELL Digital Video Recorder User Manual Server list Interface Config interface...
  • Page 87 TECHSHELL Digital Video Recorder User Manual Main parameters for mobile phone video configuration Record file clip size: Single video size. When the video size is greater than setup value, change another video files Reserved disk space: Reserved SD Card disk space, when the disk space is less than setup value, the video will be stopped Display configuration：...

  • Page 88: The Installation & Operation Methods For Android Mobile Clients Software Installation

    TECHSHELL Digital Video Recorder User Manual 8.4 The installation & operation methods for Android mobile clients Software Installation Step 1: run Google Market program Step 2: search”SuperCam” Step 3: press “Install” button Step 4: click “OK” button...
  • Page 89 TECHSHELL Digital Video Recorder User Manual Step 5: user can view the download and install process in notifications; finished download, the software will install automatically. Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.

  • Page 90: Live View

    TECHSHELL Digital Video Recorder User Manual 【 【 【 【 Playback】 】 】 】 playback record file 【 【 【 【 Image】 】 】 】 image view 【 【 【 【 Log】 】 】 】 【 【 【 【 Server List】 】 】 】 device list log record 【...
  • Page 91 TECHSHELL Digital Video Recorder User Manual Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ...
  • Page 92 TECHSHELL Digital Video Recorder User Manual Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3） （Fig 4） Click the record file (Fig 3) to playback (Fig 4) Server list...
  • Page 93 TECHSHELL Digital Video Recorder User Manual Config interface Tick off Sound Alarm， when Video Loss/Sensor/Motion Alarm setting happen，trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm Storage setting User can setup the relevant parameters of mobile video.

  • Page 94: Installation And Operation Methods For Blackberry Mobile Phone Client

    Digital Video Recorder User Manual 8.5 Installation and Operation methods for blackberry mobile phone Client 8.5.1 Installation instruction for Blackberry mobile phone client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown.
  • Page 95 TECHSHELL Digital Video Recorder User Manual 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2.
  • Page 96 TECHSHELL Digital Video Recorder User Manual 2) Enter into Menu->Option->Cache Operations, clear up browser cache. Note： ： ： ： When user used the SuperCam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->SuperCam and click “Disable Compatibility” button.

  • Page 97: Operation Method For Black Berry Mobile Phone Client

    TECHSHELL Digital Video Recorder User Manual 8.5.2 Operation method for Black berry mobile phone client Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
  • Page 98 TECHSHELL Digital Video Recorder User Manual 【 【 【 【 Playback】 】 】 】 【 【 【 【 Image】 】 】 】 【 【 【 【 Live】 】 】 】 playback record file image view live view 【 【 【 【 Log】 】 】 】...
  • Page 99 TECHSHELL Digital Video Recorder User Manual Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ...
  • Page 100 TECHSHELL Digital Video Recorder User Manual Software configuration Information view...

  • Page 101: Appendix A Faq

    TECHSHELL Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c.
  • Page 102 TECHSHELL Digital Video Recorder User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle.
  • Page 103 TECHSHELL Digital Video Recorder User Manual Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected. Solution: Please check the connection of hard-disk cable and data cable and make sure they are well connected; If still not working, please unplug them and then try re-plugging again;...
  • Page 104 TECHSHELL Digital Video Recorder User Manual numbers, and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller.
  • Page 105 TECHSHELL Digital Video Recorder User Manual Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser.

  • Page 106: Appendix B Calculate Recording Capacity

    TECHSHELL Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.

  • Page 107: Appendix C Compatible Devices

    TECHSHELL Digital Video Recorder User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity 512MB, 1G, 2GB Netac Kingston Aigo Smatter vider SanDisk Tab C.1 Compatible USB drive 2. Compatible HDD list Brand Capacity Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS...
  • Page 108 TECHSHELL Digital Video Recorder User Manual Appendix D 4-CH Specifications Compression format Standard H.264 Baseline Composite：1.0V p-p/75 BNC×2 , VGAX1 Video output Composite：1.0V p-p/75 BNC×4 Video input VGA Resolution 1280*1024 /1024*768/ 800*600 Record Resolution 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate...

  • Page 109: Appendix D 4-Ch Dvr Specifications

    TECHSHELL Digital Video Recorder User Manual Appendix E 8-CH Specifications Compression format Standard H.264 Baseline Composite：1.0V p-p/75 BNC×2 , VGAX1 Video output Composite：1.0V p-p/75 BNC×8 Video input VGA Resolution 1280*1024 /1024*768/ 800*600 Record Resolution 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate...

This manual is also suitable for:

Vxs-8

Table of Contents