Techshell VXH-4 User Manual page 104

numbers, and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456),
or you can use the digital keys in the front panel, or the digital keys on the remote controller.
Q11: Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR? And
why must we format it again?
When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without
format. However, when a DVR adds to a new hard disk, it will identify the hard disk as a new one and inquire whether to
format no matter whether this hard disk used or not in another same type DVR before. In this condition, it can be used
normally after formatted according to the guide; if two or more hard disks used in different DVRs, when used in another
DVR with the same type, they will be identified to be two or more new hard disks, and all of them need to format. In general,
please do not try using more disks removed from different DVRs into another one in case the data lose.
Q12: What are the minimum configurations of PC for clients connecting?
PC Module
CPU
Motherboard
HDD
RAM
VGA
OS
DirectX
Q13: How to handle the situation when codec Control is blocked to install in the VISTA or Win7 system?
If user gets this problem, may have two ways to fix it:
a. Enter Control Panel User Account and Family Safety
TECHSHELL Digital Video Recorder User Manual
Parameters
Intel Celeron 2.4G
Intel 845
80G
512M
NVIDIA GeForce MX440/FX5200; ATIRADEON 7500/X300
Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA
9.0
User Account Control(refer to below picture); click Turn User
98