Local I/O Cable - HP ProLiant BL30p Maintenance And Service Manual

Table 4-2: System Board Components and Connectors
Item
1
2
3
4
5
6
7
8
9
10
11
12

Local I/O Cable

Use the local I/O cable to perform some server blade configuration and diagnostic
procedures. The server blade has an I/O port that accepts the local I/O cable
HP ProLiant BL30p Server Blade Maintenance and Service Guide
Description
Power button/LED board connector (under the fan
assembly)
Fan assembly connectors (2)
System Maintenance Switch (SW1)
Processor socket 2
Adapter card connectors (2)
Battery
Power converter module
DIMM slots (2)
Processor socket 1 (populated)
Hard drive cable connector
Fan assembly
Drive cage assembly
CAUTION: Disconnect the local I/O cable from the port when not in use. The port and
connector do not provide permanent connections.
CAUTION: Disconnect the local I/O cable when not in use. The port and connector do not
provide a permanent connection. Rear iLO connector performance degrades when the local
I/O cable is in use, even when the iLO connector on the cable is not in use.
CAUTION: Always match the I/O cable labeled with the I/O icon to the I/O port also labeled
with the I/O icon. The diagnostic cable and port have no labels. Mismatched cables prevent
proper connection.
Connectors, LEDs, and Switches
4-5