Optical Device - HP DL360 Maintenance And Service Manual

To replace the hard drive:
1. Slide the hard drive into the open bay (1).
2. Close the drive latch to secure the hard drive into the server (2).
Figure 2-10: Installing a hot-plug U320 SCSI hard drive

Optical Device

The server supports a diskette drive and an optical device. The optical device and the diskette
drive may be removed independently.
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
CAUTION: Do not operate the server without an optical device installed. Failure to install an
optical device can lead to improper cooling and may damage the system.
Removal and Replacement Procedures
2-13