Status LEDs and Buttons
Status LEDs and Buttons
This section describes the location and meaning of LEDs and buttons and includes the following topics:
•
•
Front Panel LEDs
Figure 3-1
Figure 3-1
1 2 3 4 5 6 7
1
2
3
4
5
Table 3-1
Front Panel LEDs, Definitions of States
LED Name
Power button/Power status LED
Identification
Cisco UCS C22 Server Installation and Service Guide
3-2
Front Panel LEDs, page 3-2
Rear Panel LEDs and Buttons, page 3-4
shows the front panel LEDs.
Front Panel LEDs
HDD04
HDD04
HDD04
HDD05
HDD05
HDD05
Power button/Power status LED
Identification button/LED
System status LED
Fan status LED
Temperature status LED
State
Off—There is no AC power to the server.
•
Amber—The server is in standby power mode. Power is supplied only to the Cisco
•
IMC and some motherboard functions.
Green—The server is in main power mode. Power is supplied to all server
•
components.
Off—The Identification LED is not in use.
•
Blue—The Identification LED is activated.
•
Table 3-1
defines the LED states.
8
9
HDD01
HDD02
HDD06
HDD07
Power supply status LED
6
Network link activity LED
7
Hard drive fault LED
8
Hard drive activity LED
9
–
Chapter 3
Maintaining the Server
HDD03
HDD08
OL-26646-01