Digimerge DGN209 Installation & User Manual page 19

Press ▲ / ▼ to move to a
4.
Setting the Motion Audible A
If enable d, the buzzer will sound if the video Motion Detect Feature is set and motion is de
On the System screen, press ▲ / ▼ to s
1.
Press ▲ / ▼ to enable or disable the Motion Audible Alarm. Options are:
2.
ON = Buzzer will so
OFF = The buzzer will remain silent when motion is detected.
3. Press MENU to confirm your change.
Press ▲ / ▼ to move to another fie
4.
Set ting the Alarm Duration
To s et the duration of the Alarm:
On the System screen, press ▲ / ▼ to select Alarm Duration, then press ENTER.
1.
Press ▲ / ▼ to select the desired time (10s, 15
2.
3. Press MENU to confirm your chan
Press ▲ / ▼ to move to another field on the System screen or press MENU to exit.
4.
S etting the Dwell Time
This timer is used to select the amount of time (between 1-10s) a channel appears
the ne xt channel. To Set the Dwell Time:
On the System screen, press ▲ / ▼ to select Dwell Time, then press ENTER.
1.
Press ▲ / ▼ to select the desired time (1-10s).
2.
3. Press MENU to confirm your change.
Press ▲ / ▼ to move
4.
Setting the Message Latch Feature
This feature determines if the On Screen messages will remain on the screen or disappear after 10s. T
Latch:
1. On the System screen, press
Press ▲ / ▼ to enable or disab
2.
NO = Screen messages will disappear after a 10 sec.
YES = On Screen messages will rema
3. Press MENU to confirm your change.
Press ▲ / ▼ to move to another field on the System screen or press MENU to exit.
4.
System Time/Date Set up
Sele in ct g the Date Display Format
On the System screen, press ▲ / ▼ to select Date Display, then press ENTER
1.
Press ▲ / ▼ to choose a display format.
2.
Y-M-D = Year - Month - Day
M-D-Y = Month - Day - Year
nother field on the System screen or press MENU to exit.
larm feature
elect Motion Audible Alarm, then press ENTER.
und when motion is detected.
ld on the System screen or press MENU to exit.
ge.
to another field on the System screen or press MENU to exit.
▲ / ▼ to select Message Latch, then press ENTER.
le the Message Latch feature. Options are:
in on the screen for the dur
Options are:
s, 20s, 30s, 1min, 2min, 3min, 5min, 10min, 15min, 30min, always)
(this is the default setting)
ation of the event.
18
tected.
on the call monitor before sequencing to
o set the Message
.