HIKVISION DS-9600 User Manual page 40

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
3. Click Apply to save the settings and click OK to exit the interface.
Explanation of the icons:
Edit basic parameters of the camera
Configuring the customized protocols
Purpose: To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them.
Steps:
1. Click the
There are 10 customized protocols provided in the system, you can edit the protocol name; and choose
whether to enable the sub-stream.
2. Choose the protocol type of transmission and choose the transfer protocols.
Note: The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list,
please refer to
Figure 2. 15
Figure 2. 13 Password Configuration of the Camera
Delete the IP camera
button to enter the protocol management interface.
Figure 2.14 Protocol Management Interface
.
Get the live view of the camera
39