HIKVISION DS-9600 User Manual page 28

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
ALARM IN
ALARM OUT
11 GROUND
12 AC 100V ~ 240V
13 POWER
14 USB interface
15 Network Interfaces with
PoE function
No. Item
1 VIDEO OUT
AUDIO OUT
2
3 AUDIO IN
4 RS-232 Interface
5 VGA
6 HDMI
7 USB
8 LAN Interface
RS-485 Interface
9
ALARM IN
ALARM OUT
10 Power Supply
11 Power Switch
No. Item
1 Network Interfaces
with PoE function
Connector for alarm input.
Connector for alarm output.
Ground (needs to be connected when NVR starts up).
AC 100V ~ 240V power supply.
Switch for turning on/off the device.
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
Network interface for the cameras and to provide power over Ethernet.
Figure 1.11 DS-7600NI-ST
Description
BNC connector for video output.
BNC connector for audio output.
BNC connector for audio input. (Also for voice talk)
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output and menu.
HDMI video output connector.
Connects USB disks and devices.
Connector for LAN (Local Area Network).
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of
PTZ receiver respectively.
Connector for alarm input.
Connector for alarm output.
12VDC power supply.
Switch for turning on/off the device.
Figure 1. 12 DS-7600NI-SP
Description
Network interface for the cameras and to provide power over Ethernet.
27