HIKVISION DS-9600 User Manual page 130

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
4. Set up arming schedule of the channel.
Select Arming Schedule tab to set the channel's arming schedule for the motion detection.
Choose one day of a week and up to eight time periods can be set within each day.
Note: Time periods shall not be repeated or overlapped.
5. Click Handling tab to set up alarm response actions of motion alarm (please refer to Chapter 8.6 Setting
Alarm Response Actions).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to
copy an arming schedule to other days.
Click the OK button to complete the motion detection settings of the channel.
6. If you want to set up motion detection for another channel, repeat the above steps or just copy the above
settings to it.
You are not allowed to copy the "Trigger Channel" action.
Note:
Figure 8.3 Set Trigger Camera of Motion Detection
Figure 8.4 Set Arming Schedule of Motion Detection
129