HIKVISION DS-9600 User Manual page 156

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
3. Check checkbox to enable UPnP. Configure the settings, including NAT traversal, NAT route and Port
Mapping settings.
NAT Traversal: To enable NAT port mapping.
NAT Route: Edit the LAN IP address of the router.
Mapping Port Type: Select a port to set port mapping.
Mapping Port: Configure the port No. for port mapping. You can use the default port No., or change it
according to actual requirements.
4. You can click
settings.
Figure 9. 23 UPnP Settings Interface
to get the latest status of the port mapping. Click
155
to save the