HearthStone 8220 Owner's Manual page 14

Whenever possible,
chimney. An interior chimney heats up more
quickly and retains its heat; thus promotes a
better draft and discourages the formation of
creosote. An exterior chimney does not benefit
from the warmth of being surrounded by the
building, so it typically operates at lower flue
temperatures than an interior chimney.
exterior chimney's draft is not as strong and
may experience
accumulation.
Extended Roof
Chimney Cap
Support Bracket
Storm Collar
(Conduit
not included)
Adjustable Roof
Flashing
Attic Insulation Shield
Firestop Radiation
Twist-Lock
Shield
Chimney Sections
Firesafe Enclosure
Support Box and Trim
Stovepipe Collar with built-in
Starter section
Two story house installation with attic.
Chimnet Cap
Storm Collar
Adjustable Roof
Flashing
Chimney Sections
Chase Enclosure
Wall Strap
Wall Thimble
Tee
Tee clean-out
Access door
Tee Support Bracket
Chimney through outer wall with enclosed chase.
Chimney is supported by Tee Support Bracket.
choose an interior
An
increased creosote
Hearthstone Quality Home Heating Products, Inc ®
Chimnet Cap
Storm Collar
Adjustable Roof
Flashing
Clay tile or Chimney Sections
other Liner
Masonry Chimney
Wall Thimble
Tee Tee clean-out
Access door
Chimney pipe through Clay tile
or other Lined Masonry Chimney
Chimnet Cap
Storm Collar
Adjustable Roof
Flashing
Insulation
Support Box
with built-in
Starter
Stovepipe
section
One story house installation with attic.
Chimney is supported by Ceiling.
REVERSAL OF THE FLUE COLLAR
In order to reverse the flue collar to vent the
stove straight out the back, follow these simple
steps;
1) Using a 10mm wrench, or socket.
Locate and remove the four bolts
holding the flue collar in place. Once all
four bolts are removed pull the collar
away from the stove. Inspect the gasket,
ensuring it is in place, and in working
order.
14
Shield
Model 8220