Remote Terminal Administration - Lucent Technologies R4.2 Administration

6
Peripheral Administration

Remote Terminal Administration

UCS 1000 R4.2 Administration 585-313-507
Do one of the following:
8
If you want a banner page to print, skip the following steps a through c
~
and continue with step 9.
If you do not want a banner page to print, complete the following steps
~
a through c.
Enter /usr/lib/lp/model
a
Enter cp standard LANHP
b
Edit the LANHP file and change
c
Enter lpstat -t
9
The output should indicate the lpstat spooler is running and the printer
you added should be displayed.
To make this printer the default, enter lpadmin -dhp4si
10
This section describes the procedures to configure and administer a remote
terminal for use with the voice system.
Remote Terminal Administration
to
nobanner="no" nobanner="yes"
Issue 3 April 2000 292
.