Installation - Nature Power 38210 Owner's Manual

3. INSTALLATION

WARNING:
Nature Power recommends that all wiring be done by a certified technician or
electrician to ensure adherence to the applicable electrical safety wiring regulations and
installation codes. Failure to follow these instructions can damage the unit and could also
result in personal injury or loss of life.
CAUTION:
Before beginning your Nature Power Inverter Installation, please consider the following:
 The Nature Power Inverter base unit should be used or stored in an indoor area away from
direct sunlight, heat, moisture or conductive contaminants.
 When placing the unit, allow a minimum of three inches of space around the unit for optimal
ventilation.
Understanding the unit features
AC Output Front Panel
GFCI Output
DC Input Rear Panel
Fan
opening
Material Prepare for Installation
Typical Wiring block diagram of the Power Inverter:
Important: Choose your AWG by the distance you will mount your inverter from the battery. We
recommend stranded wire. Stranded wire does not fatigue or loose connections over time. It is
best to attach wires using crimped connectors.
•
6 Meters > 10 AWG
• 9 Meters > 8 AWG
•
Note: Longer distances are not recommended or loss of current may occur.
Picture shown 38210
Picture shown 38210
Page 5
Status Indicator
Display
On/Off Switch
Output Port for optional
remote switch
USB Output
DC Input Terminals
Ground Terminal