Table of Contents
Advertisement
Digital Video Network Surveillance System
up. If you press "Confirm" button, DVR will start to backup the selected
segments. If you press "Cancel" button, DVR will abort backup.
Playback the video segment
You can use our file player software to playback the video segment in PC. You
can find the player software in attached CD.
Exit playback interface
Please refer to chapter 4.6.
4.8 Shut Down DVR
Shut down DVR normally
Use menu
Enter into "Utilities" menu, move "Active Frame" to "Power Off" button and enter into
power off dialog, press "Confirm" to make DVR ready for shutting down, then turn off the switch
on the rear panel.
Turn off the power switch of real panel directly.
Chapter5 Parameters Setup Guide
Only the users that have "Parameters Setup" right need to read this chapter. When
the following parameters are modified and saved, you must reboot the DVR to make
the new parameters take into effective. Other parameters do not need to reboot.
5) Any network parameters
6) resolution and record schedule
7) External alarm sensor type
8) View tampering alarm schedule
9) Video lost alarm schedule
10) Motion detection alarm schedule
11) External alarm schedule
12) Alarm output schedule
5.1 Administrator and Password
When DVR is left from factory, there is one default administrator. The name is
"admin" and password is "12345". The name can not be changed, while the password
can be.
Unisight Digital Technologies, Inc.
31
Advertisement
Table of Contents
