Unisight TZHEF08 User Manual page 50

Digital Video Network Surveillance System
Step 6: Motion alarm record channel setup: When there is motion alarm happened, you
can trigger related camera to start to record. In "Motion Alarm Handle" menu, you can select one
or more record channels. Please use[ENTER]or[EDIT]key to enable the flag into " ".
Note: In order to make the cameras start recording, in "Recording" menu, you must enable
recording schedule and set "Rec Type" as "Motion Detection" or "Motion | Alarm". Please refer to
chapter 5.12 for recording setup.
Step 7: Motion alarm schedule: When the motion alarm is happened in schedule, DVR will
response such as "On Screen Warning", "Audible Warning", "Upload to Center" and "Trigger
Alarm Output". You can setup 4 time periods for one day and 7 days for one week.
Note: Time periods in one day can not be repeated.
Step 8: Motion alarm handle method setup: You can select one or more handle methods
such as "On Screen Warning", "Audible Warning", "Upload to Center" and "Trigger Alarm
Output".
Description: If "On Screen Warning" is enabled, when there is motion alarm happened and
DVR is in preview mode, DVR will switch to the related camera. If you trigger more than one
Fig 5.18 Motion alarm handle setup
Unisight Digital Technologies, Inc.
50