Unisight TZHEF08 User Manual page 68

Digital Video Network Surveillance System
Press "Add" button to add one cruise point.
Press "Confirm" button to save the cruise point into the sequence.
After you finish setup the sequence number, press "StartSeq" to check the current sequence.
Press "StopSeq" button to stop checking.
You can delete cruise points in one sequence.
After you finish sequence setup, press "Return" button back to "PTZ" menu. In "PTZ" menu,
press "Confirm" button to save the modification.
Please make sure the PTZ you are using can support sequence function.
Cruise setup
In "PTZ" menu, press "Setup" button on the right side of "Cruise" item, you can enter into
"Cruise" setup menu: Shown as fig 5.32
Press "RecCru" button, you will enter into "PTZ control" interface. You can start controlling
PTZ with direction keys, press[ENTER]to save the operation track and return "Cruise" setup
menu. Press "StartCru" button to repeat the PTZ track until you press "Stop" button.
Press "Return" button back to "PTZ" menu. In "PTZ" menu, press "Confirm" button to save
this cruise.
Fig 5.32 Cruise setup
Unisight Digital Technologies, Inc.
68