Table of Contents
Advertisement
Digital Video Network Surveillance System
step 8. In "Image Setup" menu, press "Confirm" key to save all cameras parameters. Press
"Cancel" button or[ESC]key to abort.
Select "Off" option for "View Tampering", you can delete the view tampering area.
Note: Only one view tampering area can be setup for each camera. The view tampering area
can not be copied. If the schedule is modified, you must reboot the device to make the parameters
into effective.
5.9 Video Loss Alarm
When the video cable or camera has something wrong, the video image is lost. If you enable
video loss alarm, in such case, DVR will make alarm.
Step 1: Enter into "Camera" menu:
Step 2: Select camera: Use[ ][ ]keys to select one camera.
Step 3: Enter into "Advanced settings" interface: Move "Active Frame" to the handle
method box on the right side of "Signal Loss" item, use[ ]key to select "Handle" option and
move "Active Frame" to the "Policy" button on right side. Press[ENTER]to enter into "Signal
Loss" interface: Shown as fig 5.16
Fig 5.16 Video signal loss handle setup
Unisight Digital Technologies, Inc.
47
Advertisement
Table of Contents
