Horizon Fitness Adventure 2 Plus Owner's Manual page 5

ASSEMBLY STEP 3
HARDWARE BAG 3 CONTENTS :
ALL
BOLT (A) SPRING WASHER (B)
MoDELS
20 mm 15 mm
Qty: 4 Qty: 4
RUNNING DECK
BASE FRAME
8
A Open hardware bag 3.
Pull Lead wIre through rIghT COnSOLe
B
FLAT WASHER (C) maST. After pulling the lead wire through the
15 mm
mast, the top of the COnSOLe CabLe should
Qty: 4
be located at the top of the mast. Detach and
discard the lead wire.
CONSOLE CABLE
With the runnIng deCK in the raised
LEAD WIRE C
position, attach the rIghT COnSOLe
maST to the baSe Frame using 4 bOLTS
(a), 4 SprIng waSherS (b) and 4 FLaT
waSherS (C).
RIGHT CONSOLE MAST
NOTE: Be careful not to pinch any wires
BOLTS (A)
while assembling the right console mast.
SPRING WASHERS (B)
FLAT WASHERS (C)
CONSOLE CABLE
ASSEMBLY STEP 4
HARDWARE BAG 4 CONTENTS :
BOLT (D) SPRING WASHER (B) FLAT WASHER (C)
15 mm 15 mm 15 mm
Qty: 6 Qty: 6 Qty: 6
CONSOLE
CONSOLE CABLES
ASSEMBLE
FLAT WASHERS (C)
LEFT SIDE
FIRST
SPRING WASHERS (B)
BOLTS (D)
CONSOLE MAST
A Disengage the deCK LOCK LaTCh with your
foot to lower the runnIng deCK.
Open hardware bag 4.
B
gently place the COnSOLe on top of the
C
COnSOLe maSTS. Attach the LeFT SIde first
using 3 bOLTS (d), 3 SprIng waSherS (b)
and 3 FLaT waSherS (C).
Connect the COnSOLe CabLeS, carefully
D
tucking wires in masts to avoid damage.
Attach the rIghT SIde of the COnSOLe
E
using 3 bOLTS (d), 3 SprIng waSherS
(b) and 3 FLaT waSherS (C).
NOTE: Be careful not to pinch any wires
while assembling the masts.
ALL
MoDELS
9