Dns Configuration - Axis Q1755 User Manual

Use the following IP address -
the following settings:
IP address - Specify a unique IP address for your AXIS Q1755/-E. (To check if the IP address you intend to use is avail-
•
able or not, click the Test button)
• Subnet mask - Specify the mask for the subnet the AXIS Q1755/-E is located on
Default router - Specify the IP address of the default router (gateway) used for connecting devices attached to differ-
•
ent networks and network segments.
IPv6 Address Configuration
Check the Enable IPv6 box to enable IPv6. Other settings for IPv6 are configured in the network router.
Services
Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates the unit's
MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the
IP address.
Notes:
• The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set.
In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.
• Pinging the unit is still possible when this service is disabled.
Enable AVHS - AXIS Video Hosting System (AVHS) in conjunction with an AVHS service provides easy and secure Internet
access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service
Provider please go to www.axis.com. If AVHS is not to be used this option can be disabled.
One-click enabled - Press the camera's control button (see Hardware Overview, on page 5) until the status LED blinks
•
green to install the camera using an AVHS service. Once registered the camera stays connected to the AVHS service. If
the camera is not registered within 24 hours after the button is pressed, the camera will disconnect from the AVHS
service.
Always - The camera will constantly attempt to connect to the AVHS service over the Internet. Once registered the
•
camera will stay connected to the service. This option can be used when the camera is already installed and it is not
convenient to use the one-click installation.
AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to
your network camera (requires Internet access).
Click Settings... to register the camera with the Axis Internet Dynamic DNS service, or to modify the existing settings (requires
access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS service for your product can
at any time be removed.
For more information, please refer to the online help.
Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click the View
button to see the current settings.
Use the following DNS server address - Enter the desired DNS server by specifying the following:
Domain name - enter the domain(s) to search for the host name used by the network cameras. Multiple domains can
•
be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example,
myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is
the Domain name.
DNS servers - enter the IP addresses of the primary, and secondary DNS servers.
•
Note:
Adding a secondary DNS server is not mandatory.
To use a static IP address for the network camera, check the radio button and then make
41
AXIS Q1755/-E - System Options