Dns Configuration - Axis M1103 User Manual

Use the following IP address - To use a static IP address for the network camera, check the radio button and then make the
following settings:
• IP address – Specify a unique IP address for your network camera. (To check if the IP address you intend to use is
available or not, click the Test button)
Subnet mask – Specify the mask for the subnet the network camera is located on
•
Default router – Specify the IP address of the default router (gateway) used for connecting devices attached to differ-
•
ent networks and network segments.
IPv6 Address Configuration
Check the Enable IPv6 box option to enable IPv6. Other settings for IPv6 are configured in the network router.
Services
Enable ARP/Ping setting of IP address – The IP address can be set using the ARP/Ping method, which associates the unit's
MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the
IP address.
Notes:
• The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set.
In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.
• Pinging the unit is still possible when this service is disabled.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service provides easy and secure Internet access to live and recorded video accessible
from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/products/avhs
Enable AVHS - Enabled by default, if AVHS is not to be used this option can be disabled.
One-click enabled - Press the camera's control button (see Hardware overview, on page 5) to connect to an AVHS service
over the Internet. Once registered, Always is enabled and the camera stays connected to the AVHS service. If the camera is not
registered within 24 hours from when the button is pressed, the camera will disconnect from the AVHS service.
Always - The camera will constantly attempt to connect to the AVHS service over the Internet. Once registered, the camera
will stay connected to the service. This option can be used when the camera is already installed and it is not convenient to use
the one-click installation.
AXIS Internet Dynamic DNS Service
Enable this option to use AXIS Internet Dynamic DNS service to assign a host name for easy access to your network camera
(requires access to the Internet)
Click Settings to register the camera with AXIS Internet Dynamic DNS service, or to modify the existing settings. The domain
name currently registered at AXIS Internet Dynamic DNS service for your product can at any time be removed.
For more information, please refer to www.axiscam.net and to the online help.
Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click View to
see the current settings.
AXIS M11 Series - System Options
29