Audio Clips - Axis Q1755 User Manual

The network camera can be set to trigger an event if the incoming sound level rises above, falls below, or passes the set
Alarm level.
Audio Output
If the sound from the speaker is too low or too high, adjust the output gain for the active speaker attached to the network
camera.
When satisfied with the settings, click Save, or click Reset to revert to previously saved settings.
Note:
To receive synchronized video in H.264 and audio, it is recommended that the time settings in the camera and client
computer are synchronized with an NTP Server. This is enabled in the camera under System Options > Date & Time.
Please refer to the help pages for more information.

Audio Clips

Audio clips can be played when an event occurs or manually from the Live View page. Audio clips are created either by
recording sound using the camera's microphone or by uploading a sound file to the camera. Audio clips that have been added
to the network camera are listed in the Audio Clip List page. You can add new clips, play, download, modify and remove clips.
Refer to the online help for further information.
AXIS Q1755/-E - Video & Audio
21