Configuring The Brother Print / Fax Server (Remote Server Mode In Nds Mode) Using Novell Nwadmin And Bradmin - Brother NC-8100h User Manual

Configuring the Brother Print / Fax server
(Remote Server Mode in NDS mode) using
Novell NWAdmin and BRAdmin
To configure a Brother Print / Fax server for remote printer mode with
NWADMIN (NetWare Administrator utility) and BRAdmin, you will need to
perform the following steps:
1. Make sure that the PSERVER NLM (NetWare Loadable Module) is
loaded on your file server and that you are logged in as ADMIN in NDS
mode on the NetWare 4.1x file server.
2. Start NWADMIN by double clicking on the icon. Select the desired
Context that will contain the new printer.
3. Select Object from the menu bar and then Create. When you get the New
Object menu, select Printer and then OK.
4. Enter the name of the printer and select Create.
5. Double click on the Print / Fax server name of your PSERVER NLM.
Click on Assignments and then Add.
6. If necessary, change the directory context. Select the printer you created
and click OK. Note the number of the printer, as you will use this later,
then click OK.
7. Select the desired Context that will contain the default print queue, and
then click on Object and Create to get New Object menu.
8. Select Print Queue and then OK. Make sure that Directory Service
Queue is selected, and then type in a name for the default print queue.
CHAPTER 9 NOVELL NETWARE PRINTING
9-10