Chapter Two Front Panel Setup Menu; Lan Main Setup Menu; 1-Setup Tcp/Ip; 1-Boot Method - Brother NC-8100h User Manual

CHAPTER TWO
21
Front Panel Setup Menu

LAN Main Setup Menu

The LAN menu selections allow you to setup the Brother MFC for your network
and Internet Fax configuration. Press [Menu] then press the appropriate number
for LAN, based on the selections displayed on your machine. After you have
displayed the LAN Main Setup menu, there are five main selections: 1-Setup
TCP/IP, 2-Setup Internet, 3-Setup Mail RX, 4-Setup Mail TX, 5-Setup Relay
and 6-Setup MISC. Proceed to the menu selection you wish to configure.
Please note that once you have specified a valid IP address for the machine, it is
also possible to configure many aspects of the MFC using your favorite web
browser. For added flexibility, the MFC is supplied with the BRAdmin
®
Professional Windows
aspects of the NC-8100h.

1-Setup TCP/IP

This menu has eight sections: 1-Boot Method, 2-IP Address, 3-Subnet Mask, 4-
Gateway, 5-Host Name, 6-WINS Configuration and 7-WINS Server.

1-BOOT METHOD

1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [1] [1].
4. Press ! or " to select AUTO, STATIC, RARP, BOOTP or DHCP.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.
7. Now make sure that you power cycle the MFC.
CHAPTER 2 FRONT PANEL SETUP MENU
2
software, which also can be used to configure many
2-1