Updating Other Mfc's Through The Network - Brother NC-8100h User Manual

CHAPTER 14 BROTHER NETWORK PC FAX SOFTWARE
Updating other MFC's through the
Network.
It is possible to program Brother MFC's on the network with either settings from
an already programmed MFC or with data from the Brother Network PC Fax
Address Book.
When Brother Network PC Fax in used from a PC that has BRAdmin
Professional installed, an extra option appears in BRAdmin. By selecting a
networked MFC in the BRAdmin main window and right clicking it you will be
presented with an extra option, Configure Address Book.
When you select this option BRAdmin reads the telephone settings from that
machine (if there are any programmed) into Brother PC Fax Address Book.
Illustrated below is the Brother Address Book, on the left are One Touch / Speed
Dial numbers read from the machine. On the right is the Brother Address Book.
It is now possible to allocate One Touch / Speed Dial numbers from the MFC
into the Brother Address Book and also use members of the Brother Address
Book and send them to the MFC. You can now make changes to the data in the
Brother Network PC Fax Address Book and click OK.
14-11