Brother Internet Print Configuring The Brother Print / Fax Server; Print / Fax Server Configuration Checklist - Brother NC-8100h User Manual

Brother Internet Print
Configuring the Brother Print / Fax server
The Print / Fax server can be configured using BRAdmin, by using a web
browser, or by using the TELNET command.

Print / Fax server Configuration Checklist

Before configuring the Print / Fax server to receive BIP jobs, be sure that the E-
mail server at the remote site (the receiving end) is configured to handle the
TCP/IP POP3, and SMTP protocols (SMTP is only required if the notification
feature is enabled).
1. Configure the POP3 server on the E-mail server at the remote site with a
mail account (Mailbox name) and password for the Brother Print / Fax
server (generally, the mail account name will be the first part of the
Email address; for example, if you assign the Email address
emailprinter@xyz.com, then the mail account name would be
emailprinter).
2. Make sure that the Print / Fax server is installed and running with
TCP/IP enabled and has a valid IP address assigned to it.
Because access to the E-mail server on most networks is usually restricted, you
may need to have your network administrator check the configuration and add
the mail account.
CHAPTER 8 BIP INTERNET PRINTING INSTALLATION
8-3