Download Print this page

Step 3: Installing The Bradmin Professional: Configuration Utility - Brother NC-8100h Quick Network Setup Manual

Print/fax server

Hide thumbs Also See for NC-8100h:

Step 2: Connecting the NC-8100h to an Unshielded Twisted

Pair 10Base-T or 100Base-TX Ethernet Network

To connect the NC-8100h to a 10Base-T or 100Base-TX Network, you must have an Unshielded Twist Pair Cable.

One side of the cable must be connected to a free port on your Ethernet hub and the other side must be connected to

the 10Base-T or 100Base-TX connector (an RJ45 Connector) of the NC-8100h.

Verifying Successful hardware Installation:

Plug in the AC power cord. After initialization and warm-up (this may take several seconds), the machine will come

to a Ready state.

Step 3: Installing the BRAdmin Professional: Configuration

Utility

(For Windows

Note

If you have another operating system, refer to the NC-8100h User's Guide located on the CD-ROM

with your MFC.

Insert the CD-ROM into your CD-ROM Drive.

The installation screen will automatically load.

If possible, select the model number and language that you use.

Select Install Software.

From the "Network Application for Optional NC-8100h" menu, select Install Software.

From the "For Administrators" menu select BRAdmin Professional.

9x, NT

4.0, Windows

2000 and XP users only)

Table of Contents