Invacare Lynx L-3X Owner's Operator And Maintenance Manual page 18

SECTION 4—SAFETY INSPECTION
❑ Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel
binds to a stop.
❑ Ensure that wheel bearings are clean and free of moisture.
❑ Ensure that the bolts and fasteners on the caster assemblies are tight.
❑ Inspect tires for flat spots and wear.
❑ Clean molded body shrouds.
❑ Check that all labels are present and legible.
Inspect/Adjust Weekly
❑ Ensure that tiller adjustment mechanism engages and disengages properly and
securely.
❑ Ensure that the scooter stops completely when throttle is released (i.e., does not
continue to roll as if the throttle is activated).
❑ Inspect tires for flat spots and wear.
Inspect/Adjust Monthly
❑ Check brake for binding or interference with travel.
❑ Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front
wheel should come to a gradual stop.
❑ Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel
binds to a stop.
❑ Inspect seat swivel for release and engagement (seat locks into the determined swivel
positions).
❑ Ensure that the bolts and fasteners on the caster assemblies are tight.
Lynx™L-3X
18
Part No. 1145807