Charge Your Wireless Router; Insert A Microsd™ Memory Card (Optional Accessory) - Telstra ELITE Pre-Paid User Manual

2.2 Charge your Wireless Router

1. Insert the charger lead carefully into the socket at the base of the router.
2. The plug only fits one way. Do not use excessive force to insert the plug.
3. Check the plug is the right way round and insert it gently.
4. Insert the other end of the charger lead (Standard USB) into the AC charger or
a USB socket on your computer.
Please note: Under conditions of extended use, low coverage, high temperature or maximum data
throughput, the battery may not fully charge, even though the router is connected to the AC charger. For
these situations it is recommended that, in addition to the charger being connected, the battery is fully
charged before extended data transfers commence.
2.3 Insert a microSD™ memory card (Optional Accessory)
To use the device as a portable storage drive insert a microSD™ card up to 32GB:

Open the memory card slot cover on the right hand side of the router.

Insert the microSD™ card as shown and press gently to click into place:

Close the memory card slot cover

Connect the wireless router to your computer using the USB cable
supplied and the memory card will display as an external drive.
7