Radio Frequency Energy - Telstra ELITE Pre-Paid User Manual

Radio Frequency Energy

Your wireless router is a low-power radio transmitter and receiver. When switched on it
intermittently transmits radio frequency (RF) energy (radio waves). The transmit power level
is optimized for best performance and automatically reduces when there is good quality
reception. Maximum power is only used at the edge of network coverage so under most
circumstances the power output is very low. Under poor network conditions the router
transmits at a higher power, may get hot and have a significantly shorter battery life.
Declaration of Conformity – Specific Absorption Rate (SAR)
We declare that the product detailed in this manual, and in combination with our
accessories, conform with the essential requirements of The Radio Communications
Standard (Electro-magnetic Radiation Human Exposure) 2003 and the Australian
Communications and Media Authority Section 376 of the Telecommunications Act 1997.
The highest value SAR result is 0.743 W/Kg at GSM 850MHz.
N14945
RoHS Declaration (Restriction of Hazardous Substances)
ZTE declares that the Wireless Router is free from hazardous materials and complies with EU
directive 2002/95/EC (commonly known as the RoHS Directive) and the amendments.
Wi-Fi Alliance Interoperability Certification
The Wireless Router has successfully completed the Wi-Fi Alliance interoperability testing
and is compatible with any wireless device bearing the logo as shown.
The model number is MF60.
Additional information is available at http://www.wi-fi.org/certification_programs.php
is a registered trademark of SD Card Association.
4