Telstra Pre-Paid Quick Manual
  1. Manuals
  2. Brands
  3. Telstra Manuals
  4. Wireless Router
  5. Pre-Paid
  6. Quick manual
Telstra Pre-Paid Quick Manual

Telstra Pre-Paid Quick Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
WELCOME
Thank you for choosing the Telstra Pre-Paid Mobile Wi-Fi.
To get the most from your wireless router and to keep it in the best condition please read this manual thoroughly.
The following parts are supplied in the box:
Parts
Telstra Pre-Paid Mobile Wi-Fi
AC Charger
USB charging cable
Quick Start User Guide
Manufacturer's Warranty Card
Quick Reference Section
Home page
192.168.0.1 or telstra.wifi.4g
Admin login
password
Default SSID
TPP4G_6digits - shown on the main display
Default Security
Enter the characters shown on the main display.
Key
Note this is case sensitive.
Restore defaults
Open the back cover. The reset button is found
next to the USB power socket. Press gently with a
pen tip or pin. All passwords and settings will be
restored to defaults and the router will reboot.
IMPORTANT: Security Settings - SSID and Wi-Fi Security Key (WPA Key)
• By default the Wi-Fi SSID and password are displayed on the main display.
• They are also printed on the label underneath the battery and on the security card provided in the box.
• Use this information to connect all your devices to your Wi-Fi router.
• To switch off the password display, log into the web interface and navigate to Settings > Wi-Fi Settings > WiFi Password Viewable.
1. A QUICK LOOK AT YOUR DEVICE
1. On / Off button - Press and hold for 1-2 seconds to switch on or off.
2. microSD(HC)™ slot for expandable memory up to 32GB
3. WPS – Press to enable Wi-Fi Protected Setup authentication process.
4. Power socket - Connect to your computer or AC charger for battery charging.
5. Antenna ports – Connect an external antenna to boost your signal. The connector type is TS5 and antennas are widely available from Telstra dealers.
6. LCD Display Panel:
Quantity
1
1
1
1
1

Advertisement

Table of Contents
loading

Related Manuals for Telstra Pre-Paid

Summary of Contents for Telstra Pre-Paid

  • Page 1 4. Power socket - Connect to your computer or AC charger for battery charging. 5. Antenna ports – Connect an external antenna to boost your signal. The connector type is TS5 and antennas are widely available from Telstra dealers. 6. LCD Display Panel:...
  • Page 2 2. INSERT YOUR SIM CARD AND BATTERY 1. Open the back cover using the thumb catch at the base of the device. 2. Insert the (U)SIM card with the gold contacts facing down as shown. Push the SIM card in as far as it will go. 3.

  • Page 3: Connect To The Internet

    Make sure Wi-Fi is enabled on your computer or other device, then search for available Wi-Fi networks. You need to connect to the Wi-Fi network called TPP4G, which is your Telstra Pre-Pay 4G Wi-Fi device. Enter the password shown on the front display of your Pre-Pay Wi-Fi.

  • Page 4: Using The Web Interface

    Login to the Web based User Interface • Use your computer to Search and Connect to the TPP4G Wireless Network. • Open a web browser and enter 192.168.0.1 or telstra.wifi.4g in the address bar • The Admin Login = password Connection Tab The Connection Tab shows a high level summary of the your device status.
  • Page 5 Settings Tab The Settings tab is intended for advanced users and network administrators. For normal use there is no need to change any settings. Record Tab The Record tab shows your Received and Sent data records.
  • Page 6 Device Information Device Information shows information about your hardware and software versions and Network conditions. 6. USING THE DEVICE AS A TETHERED MODEM The mobile Wi-Fi can also be connected as a tethered modem which is a wired connection using the USB data lead. •...

  • Page 7: Troubleshooting Tips

    Log into the web interface and navigate to Settings > Wi-Fi Settings to select your SSID and Password preferred options. on the main display? Manufacturer See your warranty card or view our website at zte.com.au/telstra Support 8. TECHNICAL SPECIFICATIONS Network & Frequency Bands 4G LTE 1800, 2100, 2600 MHz...

  • Page 8: Other Information

    9. OTHER INFORMATION Computer Requirements The router will operate with any PC, MAC or other device that supports Wi-Fi and has a standard internet browser installed. ZTE cannot guarantee that third party hardware or software is compatible with this product. Warnings and Safety Notices Please read all the safety notices before using this device.
  • Page 9 • Contact Telstra to obtain your 16 digit unlock code. • An unlocking fee may apply. • 5 incorrect attempts will block the unlock process and the device will then only work with a Telstra SIM card. • Contact Telstra for more information.

This manual is also suitable for:

Pre-paid mobile wi-fi

Table of Contents