Gamma; Aperture - Siemens CCBS1337-LP Instruction Manual

7.2.10 GAMMA

7.2.11 APERTURE

Siemens Building Technologies
Fire Safety & Security Products
Move the cursor to the position shown in Fig. 9.
Use the LEFT/ RIGHT button to choose between ATW1, ATW2, and manual mode.
ATW1
The TTL auto trace white balance algorithm is designed for perfect color
reproduction. The color temperature range is 2600°K-6000°K.
ATW2
The TTL auto trace white balance algorithm is designed for perfect color
reproduction. The color temperature range is 2500°K-10000° K.
Manual mode
Press the ENTER button to enter manual mode. To obtain correct manual white
balance, adjust the R and B (red and blue) values using the UP/ DOWN button.
To exit, use the LEFT/ RIGHT to move the cursor between R and B, and press
ENTER.
WHITE BAL ATW2
GAMMA 0.45
APERTURE MID
MIRROR OFF
PRIVACY ZONE <OFF>
OPTION <SET>
REMODE <SET>
BACK EXIT CANCEL DEFAULT
Fig. 10 GAMMA
The values which can be selected are 0.45 and 1.0.
Move the cursor to the position shown in Fig. 10 to set GAMMA value.
Generally, the default value 0.45 is used for CCTV monitor. For image processing
purposes, 1.0 can be selected.
WHITE BAL ATW2
GAMMA 0.45
APERTURE MID
MIRROR OFF
PRIVACY ZONE <OFF>
OPTION <SET>
REMODE <SET>
BACK EXIT CANCEL DEFAULT
Fig. 11 APERTURE
This function is for setting the picture sharpness. (LOW, MID, HIGH)
Move the cursor to the position shown in Fig. 11.
Use the LEFT/ RIGHT button to choose HIGH, MID or LOW.
Installing the Camera
19
03. 2005