Gain; Sync - Siemens CCBS1337-LP Instruction Manual

7.2.6

GAIN

7.2.7

SYNC

Siemens Building Technologies
Fire Safety & Security Products
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
Fig. 6 GAIN
Selection of GAIN: (NORMAL / TURBO / OFF)
Move the cursor to the position shown in Fig. 6.
Using the LEFT/ RIGHT button, set the gain to NORMAL, TURBO or OFF.
NORMAL Standard position, GAIN=24dB.
TURBO High-sensitivity position, GAIN = 30dB.
OFF
Minimum gain. If this is selected, D/N mode (AUTO) is disabled.
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
Fig. 7 SYNC
Move the cursor to the position shown in Fig. 7.
Use the LEFT/ RIGHT button to choose INT or LL. The LL function is available only
for camera models supplied with AC power.
INT The camera is in the internal SYNC mode.
LL The camera is in the line lock mode; you can adjust the phase angle from 0 ~ 300°
accordingly. The default is 0° .
NOTE:
For DC power models, the SYNC will be set automatically to INT mode.
Installing the Camera
17
03. 2005