PID Select
PID Select determines how the PID will be
entered during the following steps. "Manual"
mode allows any PID to be entered. In "List"
mode, the MRD 3187B will only allow the
PIDs to be entered that are in the PMT. In the
following steps, only the
are needed to change the PID if this option is
set to "List."
1. Use the
and
the cursor to, "PID Select:" then press
the
button.
2. Use the
and
either "Manual" or "List," then press the
button to save the selection.
PCR
1. Use the
and
cursor to, "PCR PID:" then press the
button.
2. Use the
and
the column to edit and use the
buttons to set the PID, then press
the
button to save the selection.
Video
1. Use the
and
the cursor to, "Video PID:" then press
the
button.
2. Use the
and
the column to edit and use the
buttons to set the PID, then press
the
button to save the selection.
Audio 1 PID
1. Use the
and
cursor to, "Audio1 PID:" then press the
button.
2. Use the
and
the column to edit and use the
buttons to set the PID, then press
the
button to save the selection.
MRD 3187B User Manual
and
buttons
buttons to move
buttons to select
buttons to move the
buttons to select
and
buttons to move
buttons to select
and
buttons to move the
buttons to select
and
Page 110
RDS1 Serv Setup
Tune Mode
:PID Lock
►PID Select :Manual
PCR PID
:0x0000
RDS1 Serv Setup
Tune Mode
:PID Lock
PID Select :Manual
►PCR PID
:0x0000
RDS1 Serv Setup
PID Select :Manual
PCR PID
:0x0031
►Video PID
:0x0000
RDS1 Serv Setup
PCR PID
:0x0031
Video PID
:0x0031
►Audio1 PID :0x0000