Starting And Shutting Down The Projector - promethean PRM-35 Owner's Manual

Starting and Shutting down the Projector

1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The POWER LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED displays a
solid green. Then press the POWER
of the remote
button
jector.
The projector splash screen displays and
connected devices are detected.
See Setting an Access Password
(Security Lock) on page 11 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the SOURCE button
and use ▲▼ to scroll
the remote
among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
5.
When the "Power Off? /Press Power
again" message appears, press the
POWER button. The projector turns
off.
Caution:
Do not unplug the power cord until the POWER LED stops flashing – Indicating the projector has
cooled down.
Promethean, Company Confidential
to turn on the pro-
of
•
•
•
•
VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
Composite Video: Traditional composite video
S-Video: Super video (Y/C separated)
HDMI: HDMI, DVI
10