Starting And Shutting Down The Projector - promethean UST-P1 Owner's Manual

Starting and Shutting down the Projector

Connect the power cord to the
1.
projector. Connect the other end to
a wall outlet.
2. Turn on the connected devices.
Ensure the POWER LED displays a
3.
solid green. Then press the POWER
button
of the remote
projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lock) on page 10 if
security lock is enabled.
If more than one input device is
4.
connected, press the SOURCE
button
of the remote
scroll among devices.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)
When the "Power Off? /Press Power
5.
again" message appears, press the
POWER button. The projector turns
off.
Caution:
Do not unplug the power cord until the POWER LED change to green–indicating the projector
has cooled down.
Promethean, Company Confidential
to turn on the
and use ▲▼ to
•
•
•
VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
Composite Video: Traditional composite video
HDMI: HDMI, DVI
9