Setting An Access Password (Security Lock) - promethean PRM-35 Owner's Manual

Setting an Access Password (Security Lock)

You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projec-
tor. When enabled, the password must be entered after you power on the projector. (See Navigating
the OSD on page 14 and Setting the OSD Language on page 15 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
1.
Press the MENU button to open the OSD
menu.
2.
Press the cursor ◄► button to move to
the Installation I menu.
3.
Press the cursor ▲▼ button to select
Advanced.
Promethean, Company Confidential 11