Starting And Shutting Down The Projector - promethean EST-P1C Owner's Manual

Starting and Shutting down the Projector

1.
Connect the power cord to the pro-
jector. Connect the other end to a
wall outlet.
The POWER LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED displays a
solid orange. Then press the
POWER button
on the projector.
The projector splash screen displays
and connected devices are de-
tected.
See Setting an Access Password
(Security Lock) on page 12 if secu-
rity lock is enabled.
4.
If more than one input device is con-
nected, press the SOURCE button
of the remote
among devices.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)
Promethean, Company Confidential
to turn
of the remote
and use ▲▼ to scroll
•
VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
•
Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
• HDMI: HDMI, DVI
10