Installation Ii Menu - promethean PRM-35 Owner's Manual

Installation II Menu

Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu.
I
TEM
Auto Source
Auto Power Off
(min.)
Auto Power On
Fan Speed
Lamp Mode
Advanced
Factory Reset
Status
Promethean, Company Confidential
Press the cursor ◄► button to enable or disable automatic source detection.
Press the cursor ◄► button to enable or disable automatic shutdown of lamp when no signal.
Press the cursor ◄► button to enable or disable automatic power On when AC power is supplied.
Press the cursor ◄► button to toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or high
altitude areas.
Press the cursor ◄► button to select the lamp mode for higher brightness or lower brightness
to save lamp life.
(Enter) / ► to enter the Advanced menu. See Advanced Feature on page 26.
Press
(Enter) / ► to reset all items to factory preset values.
Press
(Enter) / ► to enter the Status menu. See page 34 for more information on Status.
Press
D
ESCRIPTION
25