Table of Contents
Advertisement
Simulation settings
You can specify whether the route should be trav-
elled once or endlessly during the simulation.
u
Touch the Options button to call up the add-
on menu.
u
Touch the symbol to change between
single and endless simulation.
The endless loop
indicates that the endless simulation
is activated.
Storing the position
Store your current position as destination and
start a route guidance to it at a later time.
u
In the Navigation menu, touch
the button to display the second
page of the menu.
u
Touch the symbol.
The Position Information menu is
displayed.
This menu contains this information:
–
Latitude/Longitude: Current position in
longitude and latitude
–
Altitude: Current height above mean sea
level
–
The address of the current location, if it is
contained in the map material
–
The compass: Direction North (reliable
information after approx. 5 km/h)
u
Touch the Save As Destination button.
The keyboard is displayed.
Simulation | Storing the position | Destination/tour memory
u
Enter a name for the destination and confi rm
with OK.
The destination is stored under the name en-
tered in the My Destinations & Tours menu.
Destination/tour memory
Two lists are available in which destinations or
tours are saved:
in the symbol
•
My Destinations & Tours:
Frequent destinations or tours can be stored
permanently in the My Destinations & Tours
menu (max. approx. 100). The destination
receives a name of your choice.
•
Last Destinations & Tours:
The last 20 destinations and tours, for which a
route was calculated or a route guidance was
started (ch. "Calculating a route" or "Route
guidance"), are listed in the Last Destinations
menu.
Saving destinations
Permanently store a destination or tour after its
entry or from the memory in My Destinations &
Tours.
Saving a destination or tour
Prerequisite:
•
You entered a destination as described in the
chapter "Destination input".
- or -
•
You entered a point of interest as described in
the chapter "Points of interest".
- or -
•
You planned a tour as described in the chap-
ter "Tour planning".
u
In the Destination menu, touch the Options
button to call up the add-on menu.
u
Touch the symbol.
The keyboard is displayed.
23
Advertisement
Table of Contents
