Table of Contents
Advertisement
Additional functions after the destination input | Country info | Simulation
Additional functions after the
destination input/tour planning
Prerequisite:
•
Destination input via keyboard or speech in-
put
- or -
•
Selection of a point of interest
- or -
•
You entered or loaded a tour
u
Touch the Options button to call up the add-
on menu.
You have now the following options:
–
Defi ning route options (ch.
"Specifying route options")
–
–
–
–
For certain points of interest only
(e.g. hospital, hotel): Dialling a
destination (ch. "Selecting a
POI")
–
For tour planning only:
Load tour from memory card (if
you already entered destina-
tions, the tour is being added)
Country info
For the country in which you are currently located,
general traffi c rules are provided, e.g. the maxi-
mum speed.
During route guidance, the country information
is displayed on the map as soon as you cross a
national border.
22
Calculating a route (ch.
"Calculating a route")
Saving a destination or
tour (ch. "Destination/
tour memory")
Displaying a destina-
tion or tour on the
map (ch. "Working
with the map")
DANGER!
Disregarding the local traffi c rules and
street routing can cause accidents
The country information may not be current due
to short-term changes in the law, signposts or
similar.
The traffi c rules and local street routing always
have priority over the information of the naviga-
tion device.
u
In the Navigation menu, touch
the button to display the second
page of the menu.
u
In the Navigation menu, touch the
symbol.
The country info is displayed.
Simulation
Start the route simulation to learn the functions
during route guidance.
Starting the simulation
Enter any start position and the destination of the
simulation. If you want to simulate a tour with in-
terim destinations, select a saved tour for the des-
tination (ch. "Tour planning").
u
Touch the symbol in the Navigation
menu.
The Simulation menu is displayed.
u
Touch the upper fi eld and enter the start po-
sition.
u
Touch the lower fi eld and enter the destina-
tion.
Enter the start position and the destination
for the simulation as it is done in the destina-
tion input.
u
Touch the Start Simulation button to travel
the route.
Advertisement
Table of Contents
